Features
*Light source:1pcs 150W white LED
*Power consumption:180W
*Beam Angle:13.5 degree
*Electronic dimmer 0~100%
*Pan movement:540°
*Tilt movement:270°
*Pan/Tilt resolution:8-16bit
*Prism rotating 5-facet prism
*Focus:linear focus from close to far
*1 fixed gobo wheel: 8gobos plus blank
*1 rotated gobo wheel: 6gobos plus blank,gobo rotating 360°
*1 color wheel:7colors plus white
*Strobe:0-16Hz, from slow to fast, adjusting
*Control mode:Auto, sound active , DMX512
*DMX channel:16CH
* LCD display *Pan/Tilt invert option
*Reset to factory settings option.
*Fan Cooling /Forced convection
Technical specifications
Set up
Disconnect the power cord before replacing a fuse and always replace with the same type fuse.
3.1 Fuse replacement
With a flat head screwdriver wedge the fuse hold out of its housing. Remove the damaged fuse from its holder and replace with exact
same type fuse. Insert the fuse holder back in its place and reconnect power.
3.2 Fixture linking
You will need a serial data link to run light show of one or more fixtures using a DMX-512 controller or to run synchronized on two or
more fixtures set to a master/slave operating mode. The combinednumber of channels required by all the fixtures on a serial data link determines the number of fixtures the data link can support.
Note! If you use a controller with a 5 pin DMX output connector. You will need to
use a 5pin to 3 pin as apter
CHAU-VET Model No: DMX5M. Or DMX 5F
The chart below details a proper cable conversion:
At first link the first light and DMX control through XLR-connection signal cable,
then connect the light in series, as the follow:
1. Connect the (male) 3 pin connector side of the DMX cable to theoutput (female) 3pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture whichwill have a (female) 3 pin connector to the input connector of thenext fixture consisting of a (male) 3 pin connector. Then, proceed toconnect from the output as stated above to the input of thefollowing fixture and so on.
Unpacking instructions
On receiving a fixture, carefully unpack the carton, check the contents to ensurethat all parts are presented, and have been received in a good condition. Notifythe shipper immediately and retain packing material for inspection if any partsappear damaged from shipping or the carton itself shows, sign of mishandling.Save the carton and all packing materials. In the event that a fixture must bereturned to the factory, it is important that the fixture should be returned inoriginal factory box and packing.
Ming Feng Lighting Co.,Ltd is one of the leading LED light product, located in Guangdong Province, China. Established in year 2009 and has more than 14 years experience in exporting LED lighting products. Ming Feng LED lighting factory produce LED Indoor Light and LED outdoor lamp. For the LED indoor light, we are producing the LED Triproof Lights, LED Vapor Tight Lights,LED down lights ,LED Flat panel, For the Outdoor LED Light, we are producing the LED flood light, LED high bay lighting, LED sports lights and some of outdoor LED landscape light.With the rapid growth of our sales volume in the market, our R&D are expanding quickly to meet the market demands.
Our main market is in European, South American and North American. Our factory locates between Shenzhen port and Guangzhou, it's convenient to visit our factory and delivery the container to all around the world based on Shenzhen port.
Ming Feng Lighting Co., Ltd warmly welcome all the partners visit our factory and share the ideas of the LED light. Ming Feng Lighting factory stays with you all the time to share the happiness of the LED light, let's work together to create an outstanding future.
SERVICE
Ming Feng lighting CO.,Ltd providing the OEM & ODM service for all the partners all around the world, Our LED light is in high quality standard at reasonable and competitive price, our designer and engineer help our LED light in tasteful design and excellent performance.We are able to offer our valuable clients:
★ OEM/ODM Serivce
★ Photometric/IES file
★ Dialux simulation design
★ PCB Design/Driver Design
★ Heat Management/Optical Design
★ Industry Design
★ Market Support
★ 3D Printing
★ Multiple Listing/Private Label.
Product Tags:
|
|
5 Years Warranty 150W 7colors LED Stage Light Moving Head Light For Party DJ Disco Nighclub Images
|
